Preventative Maintenance

We recommend you join our preventative maintenance program to ensure that you are scheduling regular maintenance on your system and to take advantage of preventative maintenance agreement customer discounts. Preventative maintenance is simply one measure you can take to make sure your system is running properly. Does your cooling system have the proper refrigerant charge? Is your system communicating properly to the thermostat controls? Is your condenser fan operating properly? Is the heat exchange working? Are the wires all connected properly? These questions can't be answered without a professional technician inspecting your system to ensure problems are not arising. A little prevention can go a long way to saving you money later.

The Aloha Scheduled Service Benefits

• Lower Utility Bills
• Extended Equipment Life
• Fewer Repairs
• Improved Capacity
• 10% Discount on Repairs
• Priority Customer
• Exceeds Manufacturers Warranty Requirements
• Inflation Protection
• Agreement is Transferrable
• 24-Hr. Emergency Service
• Never an Overtime Charge
• 2 Year Warranty on All Repairs

25 Point Service Checklist

Whenever you need service performed on you unit, our technicians will perform the following 25 point checklist.

• 1.CHECK THERMOSTAT OPERATION
• 2.CLEAN FILTER OR REPLACE(CUSTOMER SUPPLIED)(XTRA IF WE DO IT)
• 3.CHECK TEMPERATURE SPLIT
• 4.CHECK STATIC PRESSURE OF AIRFLOW
• 5.CHECK FREON PRESSURES
• 6.INSPECT FUSED ELECTRICAL DISCONNECT
• 7.INSPECT WIRING & TIGHTEN ELECTRICAL CONNECTIONS
• 8.INSPECT ELECTRICAL RELAYS AND PRESSURE CONTROLS
• 9.INSPECT COMPRESSOR CONTACTOR FOR VOLTAGE ACROSS COIL
• 10.INSPECT CONTACTOR ELECTRICAL POINTS FOR PITTED SPOTS
• 11.INSPECT ELECTRICAL SAFETY CIRCUITS
• 12.CHECK VOLTAGE & AMPERAGE TO OUTDOOR MOTOR
• 13.CHECK VOLTAGE & AMPERAGE TO INDOOR MOTOR
• 14.CHECK VOLTAGE & AMPERAGE TO COMPRESSOR
• 15.CHECK OUTDOOR CAPACITOR (CAPACITY AND LEAKAGE ISSUES)
• 16.CHECK INDOOR CAPACITOR (CAPACITY AND LEAKAGE ISSUES)
• 17.CHECK COMPRESSOR CAPACITOR (CAPACITY AND LEAKAGE ISSUES)
• 18.CHECK DEFROST OPERATION WHEN POSSIBLE
• 19.INSPECT BEARINGS & LUBRICATE ALL MOVING PARTS WHEN AVAILABLE
• 20.INSPECT BLOWER ASSEMBLY FOR CLEANLINESS
• 21.INSPECT INDOOR COIL AND OUTDOOR COIL FOR CLEANLINESS (INFORM CUSTOMER)
• 22.INSPECT PRIMARY AND SECONDARY DRAIN PANS (CLEAN WHEN NECESSARY)
• 23.CHECK WATER DRAINAGE OF CONDENSATE (CLOGGED INFORM CUSTOMER)
• 24.CHECK AIR DUCT CONNECTIONS AT SUPPLY AND RETURN PLENUM
• 25.CHECK KING VALVES, SHRADER VALVES FOR LEAKS (TIGHTEN WHEN NEEDED)

Upon completion we will cycle system one to two times in both cooling and heating when possible.

If you are interested in our maintenance plan, please fill out and mail or bring in our Service Agreement, or contact us today!